StopDown

Government, Defense & Space

Defence tech in India, explained

Defence tech in India means private companies that build drones, sensors, electronics, engines and software for the armed forces. The only major buyer is the state, so a startup's fate depends on trials, procurement rules and policy as much as on its engineering.

By · Editor

What is defence tech?

Defence tech covers the equipment and software used by the army, navy, air force and paramilitary forces. For startups, the most active areas are drones and counter-drone systems, thermal imaging and other sensors, communications, radar, autonomy software, cyber defence, engines and components, and training.

India has long relied on state-owned defence factories, public sector companies and imports for its equipment. A newer group of private companies is now supplying systems and parts. In StopDown's data these include ideaForge, Tonbo Imaging, Garuda Aerospace, Zuppa, BonV Aero, InsideFPV, EyeROV, DheyaTech, Newspace Research and Technologies, Sanlayan Technologies and Hughes Precision.

Not all defence startups build weapons. Many build tools around them: sensors that see in the dark, drones that carry loads to high-altitude posts, software that fuses information from cameras and radars, or machines that inspect underwater structures.

Why did the opening happen?

India is one of the world's largest importers of defence equipment, and the government wants more of it made at home. Two steps in particular helped startups. In 2018 the defence ministry launched iDEX, Innovations for Defence Excellence, which posts problems from the armed forces and lets startups and small firms propose solutions, with grants and a route to orders. The ministry also issued positive indigenisation lists, naming items it will buy only from Indian sources, which gave local makers a protected market.

The Defence Acquisition Procedure 2020 also changed how the forces buy. It favours vendors that are owned and controlled by Indians and has categories that reward Indian design and development. A draft replacement, DAP 2026, was released for comment in February 2026, so founders check which version is in force before planning.

Foreign investment rules matter too. Defence manufacturing is open to foreign investment up to a limit on the automatic route, with government approval needed above it. The limit applies to companies with new industrial licences, and some procurement categories carry lower limits, so the details depend on the case.

How does a startup get an order?

The path is long and has distinct steps. First comes a need: a force states a problem or a requirement. A startup then builds a prototype, often with iDEX or other grant money. The product goes to user trials, where soldiers use it in field conditions, and sometimes to technical evaluation by a testing agency. If it passes, the force may place a small first order, then larger ones after more trials.

Each step can take months. Trials can fail for reasons that have nothing to do with the technology, such as a change in requirements. Even a successful trial may not lead to an order if funds are not approved in that year.

StopDown's recent data shows what progress looks like: BonV Aero delivering 45 cargo drones to the Army, and Zuppa planning to train army drone pilots. Orders of this kind are small by defence standards but important, because they prove the product to the next buyer. Training and support also give companies service income that continues after the drone is sold.

How do defence startups make money?

Revenue comes first from product sales: a price per drone, sensor or system. Then come spares, repair, upgrades and training, which can bring in steady income for as long as the equipment stays in use. Software firms earn licences and updates. Some companies earn from development contracts, where the buyer pays them to design and test something new.

Selling to the forces also means selling to prime contractors, the big companies that integrate many parts into a system. A startup that makes one sensor may sell it to a larger firm, which sells the finished system to the forces. This is a common route for component makers.

Exports are a growing hope. Thermal imaging, drones and electronics can be sold to friendly countries, but export of defence items needs government permission, which adds time and paperwork.

Who funds defence startups?

Funding comes from a mix. StopDown's data lists investors active in the past year, including Ashish Kacholia, Piper Serica, Inflection Point Ventures, the Technology Development Board, Avaana Capital, Ajvc, 360 ONE Asset and Avendus, plus family offices and wealthy individuals. Some companies also raise from strategic backers that are themselves manufacturers.

Recent examples in the data include Hughes Precision raising over ₹250 crore for capacity expansion and DheyaTech securing ₹43 crore for gas turbines. These show that defence manufacturing needs factories and machines, not only code, so rounds are larger than for a typical software startup.

Public markets are opening up. Tonbo Imaging received SEBI's approval for an IPO and listed on 23 October 2026, according to StopDown's data, and ideaForge is already mentioned in the sector as a listed name. A listing lets early investors sell and gives the company access to bigger funds.

What makes it hard?

Time is the main difficulty. A hardware startup may need two or three years from prototype to meaningful orders, and it must pay engineers and buy materials all through that period. This is why grants and development contracts matter so much.

Quality and certification are strict. Equipment has to work in heat, cold, dust and altitude, and must meet defined standards before the forces accept it. Security clearances may be needed for staff and sites.

Supply chains are another issue. Many electronic parts, such as chips and sensors, come from abroad, and sanctions, export controls or delays can hold up production. Companies that build more of their own parts at home gain control but spend more.

Finally, there are ethical and reputation questions. Some investors avoid weapons, and founders need to be clear about what their products do. This guide is general information; seek professional advice before investing in or founding a defence company.

The breakdown

Value chain, business models, numbers, rules and risks

Business models

Business models
ModelHow it makes moneyWho uses it
Product salesPrice per drone, sensor or systemDrone, thermal imaging and electronics makers
Development contractBuyer pays to design and test a new productCompanies selected through iDEX or similar programmes
Spares, repair and upgradesIncome that continues while equipment is in useHardware makers with large installed bases
Training and servicesFee per course, pilot or contractDrone pilot training and maintenance firms
Component supply to primesSell parts to larger integratorsEngine, radar and electronics makers

The numbers that matter

  • Trial-to-order conversion: the share of trials that become repeat orders.
  • Order book: signed but undelivered orders, the best guide to coming revenue.
  • Gross margin on hardware, which is lower than software.
  • Share of parts made in India, which affects supply risk and eligibility for local-source preferences.
  • Working capital needed between buying materials and being paid.

Rules and regulators

Rules and regulators
Regulator or lawWhat it means
Defence Acquisition Procedure 2020Sets how forces buy; favours Indian-owned and Indian-controlled vendors
iDEX and positive indigenisation listsRoute for startups to propose solutions; lists protect Indian-made items from imports
Industrial licensing for defenceManufacturing of many defence items needs a government licence
FDI policy for defenceForeign investment allowed to a limit on the automatic route, approval above that
Drone Rules 2021Registration, pilots and flying zones for drones
Export authorisationGovernment permission needed to sell defence items abroad

Risks

  • A single buyer and yearly budget decisions.
  • Trials that fail or orders that are delayed or cut.
  • Dependence on imported parts and export controls.
  • High capital needs for factories and testing.
  • Policy changes to import lists, licensing or foreign investment.

Defense tech: latest on StopDown

Questions people ask

7

What do Indian defence tech startups build?

Mostly drones, thermal imaging and other sensors, electronics, communications, radar, autonomy software, cyber defence and engines. Some also provide training and services to the armed forces.

What is iDEX?

iDEX is Innovations for Defence Excellence, started by the defence ministry in 2018. It lets startups and small firms propose solutions to armed-forces problems, with grants and a path to trials and orders.

Can foreign investors fund Indian defence startups?

Yes, within limits. Foreign investment in defence is allowed up to a cap on the automatic route and needs government approval above it. The cap depends on the case, so check current FDI policy.

Which Indian defence startups are well known?

Well-known names in StopDown's data include ideaForge, Tonbo Imaging, Garuda Aerospace, Zuppa, BonV Aero and EyeROV. This is a description, not a ranking.

Which Defense tech startups in India raised money recently?

GalaxEye (₹63.84 crore, grant); Hughes Precision (₹250+ crore); DheyaTech (₹43 crore); Beijan (₹1.7 crore, pre-seed); Newspace Research and Technologies ($35-40 million, Series C).

Who invests in Defense tech startups in India?

Among the most active backers in StopDown's coverage over the last year: Ashish Kacholia, Inflection Point Ventures, Piper Serica, 360 ONE Asset, Ajvc.

Which Defense tech companies are in the news?

Recent stories on StopDown cover Zupple Labs, Tonbo Imaging, Zuppa, BonV Aero, GalaxEye, Hughes Precision, DheyaTech, Beijan.

More in Government, Defense & Space